CONFERENCE PROGRAMME

SUNDAY – SEPTEMBER 9, 2007 WELCOME COCKTAIL at 20:45 Yucelen HOTEL, Akyaka-Gokova
MONDAY – SEPTEMBER 10, 2007
08:00-09:00	Registration
09:00-10:30	Opening Ceremony
10:30-11:00	Coffee Break
11:00–12:00	Chair: I Gökalp Conference Hall- B
	The modelling of liquid sprays in industrial applications using CFD codes (Invited lecture)					Philip Stopford ANSYS Europe Ltd. UK
12:00-14:00	Lunch Break
13:00-14:00	*Meeting of the Editorial Board of Atomization and Sprays
	Sprays and Atomization in Internal Combustion Engines (1) Conference Hall- B			Spray Modelling (1) Conference Hall- C				Droplet Wall Interactions Conference Hall- D
	Chair: Semih Eser			Chair: Philip Stopford				Chair: Antonio Lozano
14:00-14:20	X-Ray measurements of the mass distribution in the dense primary break-up region of the spray from a standard multi-hole common-rail diesel injection system P. Leick, T. Riedel, G. Bittlinger, C.F. Powella, A.L.Kastengrena, J. Wang			Numerical simulation of unsteady nozzle flow and spray formation under diesel engine conditions M. Konstantinov, C. Wagner				Considerations in measurement and modelling of spray transport phenomena with wall interaction D. Kalantari and D.D.Ganji
14:20-14:40	Polygonal splashing structures by diesel jet impingement on the solid wall M. Weclas, J. Cypris			Towards large Eddy simulation of diesel fuel spray using an Eulerian-Eulerian approach L. Martinez, A. Benkenida, B. Cuenot				Thermal induced atomization and heat transfer in drop impacts against surface enhanced heated targets A. S. Moita, A. L. N. Moreira
14:40-15:00	Practical study on high-dispersion and high-penetration diesel injection nozzle N. Tamaki, Y. Nishida, T. Hosokawa			Using PDA data to validate the CFD models of three airblast atomizer designs M. Burby, A.J. Yule, G.G.Nasr, A. Wheatley				Modelling of liquid films formed by sprays impinging onto solid walls M. Spathopolou, M. Gavaises, S. Tonini, A. Bisighini, G.E. Cossali, M. Marengo, A. Theodorakakos
15:00-15:20	Capturing the thermal radiation of burning diesel sprays in a pressurized chamber A. Pawlowski, R. Kneer			Coupled joint PDF and spray flamelet modeling for Methanol and Ethanol/Air spray combustion Hai-Wen Ge, E. Gutheil				Analysis of droplet wall interaction using advanced image processing techniques A. Müller, F. Schumann, K. Dullenkopf, H.-J. Bauer
15:30-16:00	Coffee Break
	Droplet Impact, Collision, Break-up Conference Hall- B			Spray Modelling (2) Conference Hall- C				Sprays and Atomization in Internal Combustion Engines (2) Conference Hall- D
	Chair: Rafaello Ragucci			Chair: Eva Gutheil				Chair: Gilles Bruneaux
16:00-16:20	Droplet collision outcomes at high Weber number N. Roth, C. Rabe, B. Weigand, F. Feuillebois, J. Malet			The study of spray structure by numerical simulation-spatial inhomogeneity of droplets in spray S. Okajima, N. Tokuoka				PIV measurement of injection pressure influence on gas entrainment in GDI-engine B. Prosperi, J. Hélie, R. Bazile
16:20-16:40	Transition of spatial inhomogeneity of droplets in spray K.Kuno, N. Tokuoka			CFD calculations and experiments of droplet interactions in two flat-type nozzle sprays S.Stübing, M.Sommerfeld				Correlations for prediction of diesel fuel spray penetration Soo-Young No
16:40-17:00	An experimental study of the crater evolution by impact of a drop onto a shallow pool N. van Hinsberg,* I. V. Roisman, C. Tropea			CFD predictions and comparisons with experimental data for a conducted hollow-cone sprays H. M. Abduljalil, R. A. Sharief, A. J. Yule				Effect of dwell time on multi-component fuel vaporization of high-pressure diesel sprays injected from cylindrical and reverse tapered multi-hole nozzles S. Tonini, E. Giannadakis, M. Gavaises, A. Theodorakakos, G.E. Cossali, M. Marengo
17:00-17:20	Binary collisions of droplets with fluid and suspension particles O. Kurt, U. Fritsching, G. Schulte
17:30-18:30	* Meeting of International Task Force
18:30-20:30	Conference Cocktail
Tuesday – SEPTEMBER 11, 2007
08:00-09:30		Registration
09:30-10:30		Chair: Norman Chigier Conference Hall- B
		Ideal sprays for new generation of automotive engines (Invited lecture)				Christine Mounaim Université d'Orléans, France Gilles Bruneaux Institut Français du Pétrole, Rueil-Malmaison, France
10:30-11:00		Coffee Break
		Spray Modelling (3) Conference Hall- B			Spray Applications (1) Conference Hall- C				Spray Formation and Atomization (1) Conference Hall- D
		Chair: S. Onbasioglu			Chair: A. Vallet				Chair: Mehmet Gunes
11:00-11:20		Maximizing energy efficiency and minimizing formation of pollutants in combustion engines and industrial furnaces by controlling fuel sprays Norman Chigier			The design of emergency safety shower heads to comply with the proposed EU standards M. Burby, G.G.Nasr, A.J. Yule, T. Hughes				Breakup of a radially expanding liquid sheet Z.W. Wang, S.P. Lin
11:20-11:40		Experimental and numerical investigation of jet penetration and primary atomization in crossflow R. Ragucci, A. Bellofiore, P. Di Martino, A.Cavaliere			The application of fine sprays in the mass decontamination of people exposed to chemical, biological, radiological or nuclear (CBRN) hazards S.E.C. Lloyd, G.G. Nasr, A. Whitehead				Structure and mass flux distribution of a side-opened hollow cone spray generated by swirl pressure atomizers E. Abo-Serie, S. Moon, C. Bae
11:40-12:00		Theoretical considerations on ultrasound assisted atomization of fluid sheets B. Heislbetz			Utilisation and performance analysis of fine sprays for disinfection within healthcare G.G. Nasr, A.J. Yule S.E.C. Lloyd, A.Whitehead				Use of solvent replacement method to prepare Sulfur Sol Ö.E. Kuzugüdenli
12:00-14:30 Lunch Break		12:00-13:00 ACM Meeting- AKM Meeting Room			13:00-14:00 AGM meeting- AKM Meeting Room
		Spray Formation and Atomization (2) Conference Hall- B			Droplet Dynamics and Evaporation (1) Conference Hall- C				Spray Modelling (4) Conference Hall- D
		Chair: A. Moreira			Chair: Christine Mounaim				Chair: G. Nasr
14:30-14:50		Influence of micro-bubbles within ejected liquid on behavior of cavitating flow inside nozzle hole and liquid jet atomization T. Oda, K. Takata, Y. Yamamoto, K. Ohsawa			Temperature measurements of evaporating ethanol/3-pentanone bicomponent droplets using 2-colour LIF V. Deprédurand, C. Maqua, G. Castanet, F. Lemoine				Fan-spray atomizers analysis through mathematical modelling M. Altimira, A. Rivas, R. Antón, G. Sánchez, J. C. Ramos
14:50-15:10		Effect of the inner gas jet on annular liquid sheet atomization N. Leboucher, G. Laporte, J. L. Carreau, F. Roger			Why d^2-law does not hold during droplet vaporization in microgravity conditions? C. Chauveau, I. Gökalp, M. Birouk				Modeling the influence of the nozzle flow on diesel spray atomization under high pressure injection conditions J. O. Soriano, M. Sommerfeld, A. Burkhardt and U.Leuteritz
15:10:15:30		Effect of particle shape on suspension stability Ö.E. Kuzugüdenli, A. Ülgen			An electrodynamic trap with an advanced geometry used for evaporation rate measurements of single water droplets C. Heinisch, J. Petter, N. Damaschke, T. Tschudi, C. Tropea				Relation between spatial inhomogeneity of fuel spray and ignition phenomenon A. Okamura, Y. Mori , N. Tokuoka
15:30-16:00		Coffee Break
		Sprays and Atomization in Internal Combustion Engines (3) Conference Hall-B			Spray Applications (2) Conference Hall- C				Experimental Techniques Conference Hall- D
		Chair: M Marengo			Chair: Hayati Olgun				Chair: Oskar Haidn
16:00-16:20		Cold start physical phenomena in diesel engines C. Vergnes, F. Foucher, C. Mounaïm-Rousselle, B. Jeanne, B. Barbeau, F. Dabireau			Descaling of wellhead production tubing using high pressure water atomisers G.G. Nasr, M. Burby and S.Giri				Development of a 2-D quantitative LIF technique for measurement of transient liquid fuel films utilising total internal reflection M. Alonso, P.J. Bowen, P.J. Kay, S. Sapsford
16:20-16:40		Characterization of deposits formed on diesel injectors in a field test and from thermal oxidative degradation of n-hexadecane in a laboratory reactor R. Venkataraman, S. Eser			The characterisation of the spray from a New and novel design of spill Return swirl atomiser G.G.Nasr, A.J.Yule, S.E.C. Lloyd				High speed imaging and CFD simulation of an hollow cone spray M.C. Amoresano, M.C. Cameretti, R. Tuccillo
16:40-17:00		Visualizing high-pressure diesel and biodiesel sprays with single-shot ultrafast X-ray phase contrast imaging K. Im, X. Xie, K. Fezzaa, Y. Wang, W. Keat Lee, Ming-Chia Lai, J. Wang			Applications of actuator designs for aerosols R. A. Sharief^, H. M. Abduljalil, G. C. Eales, A.J., Yule^, K.Laidler				Image statistical analysis procedures for spray morphology investigation A. Bellofiore, R. Ragucci, P. Di Martino, A. Cavaliere
17:00-17:20					Effect of viscosity, surface tension and nozzle size on atomization in two-phase nozzles C.E. Ejim, B.A. Fleck, Amirfazli
20:00		Conference Dinner (in MARMARIS Resort Town)
Wednesday – SEPTEMBER 12, 2007
9:30-10:30		Chair: A Cavaliere Conference Hall- B
		Cryogenic atomization at near-critical conditions in liquid propellant rocket engines (Invited lecture)				Oskar Haidn German Aerospace Center (DLR), Institute of Space Propulsion Lampoldshausen, Germany
10:30-11:00		Coffee Break
		Spray Formation and Atomization (3) Conference Hall- B	Droplet Dynamics and Evaporation (2) Conference Hall- C				Spray Applications (3) Conference Hall- D
		Chair: J. Wang	Chair: Fehmi Akgun				Chair: Atila Yucel
11:00-11:20		Effervescent atomizer: influence of the internal geometry on atomization performance J. Jedelsky, J. Otaha, M. Jicha	Acetone fraction measurements in bicomponent evaporating droplets using laser-induced fluorescence C. Maqua, V.Deprédurand, G. Castanet, F. Lemoine				Contribution to the modelling of the atomization of pesticides M. De Luca, A. Vallet
11:20-11:40		Multiple regime heat transfer correlation for spray/wall interaction and thermo-induced secondary atomization characteristics M. R. O. Panão, A. L. N. Moreira	Droplet transport rates in a turbulent hot airflow M. M. Abou Al-Sood, M. Birouk, I. Gökalp				Fundamental principles and designs of aerosol actuators to cure low voc products R. A. Sharief, K. Laidler
11:40-12:00		Characterization of the effervescent atomization of glycerin a by-product of biodiesel production A.P.M. Peixoto, J.C.F. Teixeira, M.E.C. Ferreira	Droplet structure formation at the spray edge J. Heinlein, R. Koerich-Decker, U. Fritsching				Effect of processing condition on size and morphology of Aluminium powder particles prepared via SAMD technique P. D. Khatibi , F. Akhlaghi
12:00-14:00		Lunch Break
		Spray Applications (4) Conference Hall- B	Spray Formation and Atomization (4) Conference Hall- C
		Chair: Sener Oktik	Chair: I Gökalp
14:00-14:20		Properties of ZnxCd1-xO films deposited by spray pyrolysis method N. Kavasoğlu, A. S. Kavasoğlu, T. Güngör	Design refinements to optimize the performance of a twin-fluid nozzle with an internal mixing chamber A. Lozano , F. Barreras, G. Ferreira, E. Lincheta
14:20-14:40		Structural and morphological characterization of ultrasonically sprayed CdS:F films V. Bilgin, I. Akyüz, E. Ketenci, S. Kose, F. Atay	Using partitions technique to enhance spray atomization R. A. Sharief
14:40-15:00		Evaluation of the empirical spray/wall interaction models Davood Kalantari	Dantec’s presantation G. Ergin
15:00-15:30		Coffee Break
15:30-16:00		Closing Session

* Poster session will be held during the coffee breaks on Tuesday 11, 2007.